(TVi) W-208
Dual 8" Line Array
| RMS Power (per element) |
350 RMS passive, LF-150 watts/HF-65 watts |
| |
|
| Line Array Element Configuration |
2x8" woofer & 1x 1.5" compression driver |
| |
|
| Sound Pressure Level (1w/1m) |
126dB |
| |
|
| Sensitivity Level |
105dB |
| |
|
| Frequency Response (+/- 3.5dB)( +/-10 dB) |
130Hz-19KHz / 120Hz-20KHz |
| |
|
| Dispersion (Verticle/Horizontal) |
10 x 100 degrees per element |
| |
|
| Weight & Dimensions (Non-powered) |
45 lbs & (9.64" slope to 6.29") x 25.19" x 12" |
| |
|
| Component (Passive & HF/LF) |
16 ohm passive mode/16 ohm HF-LF bi-amp mode |
| |
|
| Connectors (Input/Output) |
NL4 (+1/-1=passive or LF) (+2/-2= HF) |
| |
|
| Hardware (Tested at a 7:1 load factor) |
Up to 12 elements per hang |
| |
|
| Optional Power Module (Estimated amp draw) |
400 watts RMS- Estimated 5 amp draw per module |
| |
|
| Optional Flight Case |
Standard 4 elements per case |
| |
|
Construction
· Hand build with premium grade three quarter inch Birch plywood construction
· High quality Duratek painted finish for durability
· Water & heat resistant coating for indoor/outdoor use
· Extra thick well placed baffling for acoustic efficiency
· Total weight of each unit is 45 lbs non powered
· The dimensions are Vertical (9.64" slope to 6.29 ") Horizontal (25.19”) Width (12”)
Components
· U.S designed and custom build specifically to match the line array element
· 350 Watts RMS per element
· Two 8” LF/MF drivers rated at 150 watts RMS each
· Single 1.5” high energy compression driver rated at 65 watts RMS
· Recommend crossover points (120-130Hz LF/MF, 2.0KHz MF/HF)
Wiring
· Hand soldered 14 gauge copper wiring
· Built in switch to choose from using internal crossover or bi-amp mode
· Parallel NL4 connector cables (Passive mode+1/-1) (Bi-amp mode +1/-1 LF, +2/-2 HF)
· Wired 16 ohms in passive mode and 16 ohms HF/LF in bi-amp mode
· Power amplifier modules are available and will mount inside of a passive element
Hardware
· Pull tested at a 7:1 load factor, 12 units per side
· Built with two layers of steel, double thickness and powder coated black
· Built with bolt-on hardware that mounts to internal steel plates for superb strength
· Slider style steel linking bars connect multiple units in an array as well as to the fly bars
· Square steel fly bar with shackle slots for hanging
Our Service
· Two year limited warranty/service plan
· Replacement drivers always available for next day shipping through our service department
