Sales Support
 
 
 

Join our mailing list!






  Home > Product Line >

  (TVi) DP-115m
 
 

CONTACT TVi DIRECT!

ANDERSON, INDIANA OFFICE:

sales@tviaudio.com 765-623-9759

SOUTH BEND, INDIANA OFFICE:

support@tviaudio.com 765-425-0598

                                                                       


Our Price:


Stock Status: In Stock
 

Product Information
 
(TVi) DP-115m
Monitor / Loud Speaker
 
 RMS Power (per element)  350 RMS passive, LF-300 watts/HF-65 watts
   
 Line Array Element Configuration  1x15" woofer & 1.7" compression driver
   
 Sound Pressure Level (1w/1m)  128dB
   
 Sensitivity Level  102dB
   
 Frequency Response (+/- 3.5dB)( +/-10 dB)  50Hz-19KHz / 47Hz-20KHz
   
 Dispersion (Verticle/Horizontal)  50-100x55 degrees
   
 Weight & Dimensions  50.7 lbs & (17.3" slope to 13.3") x 26.5" x 15.1"
   
 Component (Passive & HF/LF)  8 ohm passive mode/16 ohm HF-LF bi-amp mode
   
 Connectors (Input/Output)  NL4 (+1/-1=passive or LF) (+2/-2= HF) 
   
 Hardware (Tested at a 7:1 load factor)  Multiple hanging points
   
 Optional Power Module (Estimated amp draw)  450 watts RMS- Estimated 5 amp draw per module
   
 Optional Flight Case  Standard 2 elements per case
   
 
 Construction
 

·         Hand build with premium grade three quarter inch Birch plywood construction

·         High quality Duratek painted finish for durability

·         Water & heat resistant coating for indoor/outdoor use

·         Extra thick well placed baffling for acoustic efficiency

Components

·         U.S designed and custom build specifically to match the loud speaker design

·         350 Watts RMS per loud speaker

·         Single 15” LF/MF driver rated at 300 watts RMS 

·         Single 1.7” high energy compression driver rated at 65 watts RMS

·         Recommend crossover points (120 Hz LF/MF, 2.0 KHz MF/HF)

Wiring

·         Hand soldered 14 gauge copper wiring

·         Built in switch to choose from using internal crossover or bi-amp mode

·         Parallel NL4 connector cables (Passive mode+1/-1) (Bi-amp mode +1/-1 LF, +2/-2 HF)

·         Wired 8 ohms in passive mode and 16 ohms HF/LF in bi-amp mode

·         Power amplifier modules  are available and will mount inside of a passive element

Hardware

·         Built with multiple hang points that mount into internal steel plates for superb strength
 

Our Service

·         Two year limited warranty/service plan

·         Reliable and timely service department

·         Replacement drivers always available for next day shipping through our service department

 




 Share your knowledge of this product with other customers... Be the first to write a review.